Why Strand pools need fibreglass pool relining sooner
A pool a few streets from False Bay lives a hard life. The south-easter blows sand and salt over it for weeks at a time. The summer sun is strong. Then winter brings cold nights and rain. Marbelite and plain concrete surfaces slowly give way under all of that. They fade, roughen, crack and start to let water through.
Fibreglass pool relining in Strand puts a reinforced fibreglass layer over your existing concrete, gunite or marbelite shell, then seals it with gelcoat. The pool keeps its shape and position. The surface becomes smooth and watertight again.
Signs a Strand fibreglass pool lining is the right fix
Not every tired pool needs a new lining. These are the signs that usually point that way:
- A rough, sandpaper feel on the walls and floor
- Patches of marbelite lifting or flaking off
- Cracks that open again after each repair
- Faded, blotchy colour that no amount of cleaning brings back
- Water loss that keeps the hose running
If you are seeing two or more, it is worth having our team take a look.
Holiday homes and rentals: timing your pool relining in Strand
Plenty of Strand homes are holiday houses or rentals that fill up over December and the Easter break. Nobody wants a drained pool when guests arrive. A relining usually takes 5 to 10 working days, depending on pool size and weather, so the quieter months between seasons are the best time to book. Tell us when the house needs the pool back and we will plan the work around that date. Windy spells can add a day or two at the gelcoat stage.
What happens during fibreglass pool relining
Preparing the old pool surface for fibreglass pool relining
We drain the pool, then grind and sand the old marbelite or concrete. Cracks are opened and repaired. A primer goes on so the fibreglass bonds properly. This stage takes patience, and it decides how long the new lining will last.
Laying fibreglass and gelcoat on your Strand pool relining
Reinforced fibreglass is built up across the whole shell. A gelcoat layer then seals it and gives the final colour and finish.
Living with a fibreglass pool in Strand
The gelcoat surface is smooth and non-porous. Algae struggles to take hold, so you usually brush less and dose fewer chemicals than with worn marbelite. Sand blown in by the wind is also easier to vacuum off a smooth floor.
With proper care, a fibreglass lining lasts 15 to 25 years. We guarantee fibreglass lining and repair work for up to 5 years, depending on the project. More detail is on our main fibreglass pool relining page.
Marbelite resurfacing is the other route for a concrete pool. We do both, and we will say which suits your pool once we have seen it. If the shell needs structural work first, see our pool repairs in Somerset West and Strand.
What fibreglass pool relining costs in Strand
Every pool is priced on its own. Size, shape, current condition and access for our team all affect the figure. We visit, measure and then send a written quote. For typical figures before you call, read our 2026 guide to fibreglass relining costs in Cape Town.
Strand pool relining questions
Does salt air damage a fibreglass pool lining?
The gelcoat is a smooth, sealed surface, so it copes far better with coastal conditions than worn marbelite. Normal care and balanced water still matter.
Can pool relining help a Strand pool that is losing water?
Yes, but we confirm where the water is going first. A leak in the pipes or skimmer needs its own repair before relining.
Is fibreglass pool relining suitable for an old marbelite pool?
Yes. After proper preparation, fibreglass bonds well over old marbelite or concrete.
What if black spots appear on a fibreglass pool later?
That is usually osmosis. We grind and disinfect the area, then reline it with fresh gelcoat.
Get a Strand fibreglass pool relining quote
Call or WhatsApp 074 378 6623, email info@poolsreno.co.za, or reach our team through the Pools Reno contact page. We will set up a site visit and a written quote.
